Res Care Water Softener Resin Cleaner RK32N 1 QT (0.946 ml)

Res Care Water Softener Resin Cleaner RK32N 1 QT (0.946 ml)




Res-Up Liquid Resin Cleaner Feeder – Fresh Water Systems





Pro Res Care is a specially formulated liquid resin cleaner designed to rid the softener of contaminants that salt alone cannot remove. Regular use of Res Care resin cleaner will restore the softener beads and control valve parts back to peak efficiency and maintain the life of the unit. For best results, use an Easy Feeder for continued defense of contaminant build-up.

99% of water softening occurs inside the resin beads. Salt only washes away the calcium but leaves the iron, manganese, silt, metal particles and organic compounds. Over time, these will coat the resin bead causing inefficiencies or total failure.

Res Care will chemically clean a fouled resin bed of a water softener and restore the exchange capacity of the resin. Most types of water softening resins can become fouled with iron and other contaminants that will affect the performance of the ion exchange system. Iron fouling can cause channeling, pressure drop, loss of capacity, hardness, and iron leakage. Regular use of Res Care will minimize fouling and extend the resin life in the water softener.



Features and Benefits:


  • Prevents iron and mineral build-up on integral parts of the softener.
  • Removes iron and aluminum fouling that causes lost capacity and a decrease in performance.
  • A non-ionic surfactant is added to aid in the cleaning of oil fouled resin.




Continual Maintenance:

  • Pro Products highly recommends the use of a Pro Easy Feeder to keep the softener running at peak efficiency.
  • The unit feeds automatically and easily installs inside or outside the brine tank. 
  • Follow the recommended dosage and feed rates specified by the manufacturer or supplier.

Manual Application 

  • Pour 4 oz. (1/2 cup) of Res Care per cuft directly into brine well (for softeners with no brine well, pour directly into the salt tank when salt is low) 
  • Regular Use: Add 1/2 oz. (1 Tbsp.) per cuft to brine well before each 
  • For Severely Fouled. Manually regenerate softener. Repeat regeneration if taste, odor, or discoloration is detected in discharge, then run cold soft water tap nearest the softener until the odor or taste is gone.

 Technical Information:

  • A liquid Phosphoric Acid mixture. Res Care is not to be used with Gel Zeolite materials.


  • Phosphoric Acid CAS# 7664-38-2
  • Poly ether Polyol CAS# 53637-25-5

Storage and Handling:

Store in unopened containers under cool, dry conditions.

Do not store with or close to strong bases Liquids.

Read relevant Material Safety Data Sheet before handling the product.


Pro Res Care is NSF Certified to meet NSF/ANSI Standard 60 for drinking water additives.


Res Care® | Pro Products


Res Care Safety Data Sheet